Skip to content

E
ezynq
Commit b0727bbb authored by Oleg Dzhimiev's avatar Oleg Dzhimiev
Browse files
Options

1. increased spaces for ramdisks to 30MB 2. fixed debug output for microzed

parent f4787d4e
Show whitespace changes
Inline Side-by-side
Showing with 13 additions and 11 deletions
u-boot-tree/include/configs/elphel393.h
View file @ b0727bbb
...@@ -122,10 +122,10 @@ ...@@ -122,10 +122,10 @@
"fpga load 0 ${loadbit_addr} ${filesize}\0" \ "fpga load 0 ${loadbit_addr} ${filesize}\0" \
"sdboot=echo Copying Linux from SD to RAM... && " \ "sdboot=echo Copying Linux from SD to RAM... && " \
"mmcinfo && " \ "mmcinfo && " \
"fatload mmc 0 0x3A00000 ${kernel_image} && " \ "fatload mmc 0 0x3F00000 ${kernel_image} && " \
"fatload mmc 0 0x3400000 ${devicetree_image} && " \ "fatload mmc 0 0x3E00000 ${devicetree_image} && " \
"fatload mmc 0 0x2000000 ${ramdisk_image} && " \ "fatload mmc 0 0x2000000 ${ramdisk_image} && " \
"bootm 0x3A00000 0x2000000 0x3400000\0" \ "bootm 0x3F00000 0x2000000 0x3E00000\0" \
"nandboot=echo Copying Linux from NAND flash to RAM... && " \ "nandboot=echo Copying Linux from NAND flash to RAM... && " \
"nand read 0x3000000 0x100000 ${kernel_size} && " \ "nand read 0x3000000 0x100000 ${kernel_size} && " \
"nand read 0x2A00000 0x600000 ${devicetree_size} && " \ "nand read 0x2A00000 0x600000 ${devicetree_size} && " \
......
u-boot-tree/include/configs/ezynq/ezynq_microzed.h
View file @ b0727bbb
...@@ -81,12 +81,12 @@ ...@@ -81,12 +81,12 @@
//#define CONFIG_EZYNQ_MIO_SDWP_0 50 /* #any but 7,8 */ //#define CONFIG_EZYNQ_MIO_SDWP_0 50 /* #any but 7,8 */
//#define CONFIG_EZYNQ_MIO_SDWP_0__PULLUP //#define CONFIG_EZYNQ_MIO_SDWP_0__PULLUP
#define CONFIG_EZYNQ_MIO_UART_1 48 /* # 8+4*N */ #define CONFIG_EZYNQ_MIO_UART_1 48 /* # 8+4*N */
#define CONFIG_EZYNQ_MIO_UART_0 50 /* # 8+4*N */ //#define CONFIG_EZYNQ_MIO_UART_0 50 /* # 8+4*N */
/* LED will be OFF */ /* LED will be OFF */
#define CONFIG_EZYNQ_MIO_INOUT_47 OUT /* Make output, do not set data. Will be set after debug will be over */ #define CONFIG_EZYNQ_MIO_INOUT_47 OUT /* Make output, do not set data. Will be set after debug will be over */
#define CONFIG_EZYNQ_MIO_GPIO_OUT_7 1 /* Set selected GPIO output to 0/1 */ #define CONFIG_EZYNQ_MIO_GPIO_OUT_7 1 /* Set selected GPIO output to 0/1 */
#define CONFIG_EZYNQ_UART_DEBUG_CHANNEL 0x0 #define CONFIG_EZYNQ_UART_DEBUG_CHANNEL 0x1
/* /*
Red LED - pullup, input - on, Red LED - pullup, input - on,
......
u-boot-tree/include/configs/ezynq/ezynq_zed.h
View file @ b0727bbb
...@@ -85,6 +85,8 @@ ...@@ -85,6 +85,8 @@
//#define CONFIG_EZYNQ_MIO_INOUT_47 OUT /* Make output, do not set data. Will be set after debug will be over */ //#define CONFIG_EZYNQ_MIO_INOUT_47 OUT /* Make output, do not set data. Will be set after debug will be over */
//#define CONFIG_EZYNQ_MIO_GPIO_OUT_7 1 /* Set selected GPIO output to 0/1 */ //#define CONFIG_EZYNQ_MIO_GPIO_OUT_7 1 /* Set selected GPIO output to 0/1 */
#define CONFIG_EZYNQ_UART_DEBUG_CHANNEL 0x1
/* /*
Red LED - pullup, input - on, Red LED - pullup, input - on,
#define CONFIG_EZYNQ_MIO_INOUT_47 OUT #define CONFIG_EZYNQ_MIO_INOUT_47 OUT
......
u-boot-tree/include/configs/zynq_zc706.h
View file @ b0727bbb
...@@ -115,10 +115,10 @@ ...@@ -115,10 +115,10 @@
"fpga load 0 ${loadbit_addr} ${filesize}\0" \ "fpga load 0 ${loadbit_addr} ${filesize}\0" \
"sdboot=echo Copying Linux from SD to RAM... && " \ "sdboot=echo Copying Linux from SD to RAM... && " \
"mmcinfo && " \ "mmcinfo && " \
"fatload mmc 0 0x3A00000 ${kernel_image} && " \ "fatload mmc 0 0x3F00000 ${kernel_image} && " \
"fatload mmc 0 0x3400000 ${devicetree_image} && " \ "fatload mmc 0 0x3E00000 ${devicetree_image} && " \
"fatload mmc 0 0x2000000 ${ramdisk_image} && " \ "fatload mmc 0 0x2000000 ${ramdisk_image} && " \
"bootm 0x3A00000 0x2000000 0x3400000\0" \ "bootm 0x3F00000 0x2000000 0x3E00000\0" \
"nandboot=echo Copying Linux from NAND flash to RAM... && " \ "nandboot=echo Copying Linux from NAND flash to RAM... && " \
"nand read 0x3000000 0x100000 ${kernel_size} && " \ "nand read 0x3000000 0x100000 ${kernel_size} && " \
"nand read 0x2A00000 0x600000 ${devicetree_size} && " \ "nand read 0x2A00000 0x600000 ${devicetree_size} && " \
......
u-boot-tree/include/configs/zynq_zed.h
View file @ b0727bbb
...@@ -122,10 +122,10 @@ ...@@ -122,10 +122,10 @@
"fpga load 0 ${loadbit_addr} ${filesize}\0" \ "fpga load 0 ${loadbit_addr} ${filesize}\0" \
"sdboot=echo Copying Linux from SD to RAM... && " \ "sdboot=echo Copying Linux from SD to RAM... && " \
"mmcinfo && " \ "mmcinfo && " \
"fatload mmc 0 0x3A00000 ${kernel_image} && " \ "fatload mmc 0 0x3F00000 ${kernel_image} && " \
"fatload mmc 0 0x3400000 ${devicetree_image} && " \ "fatload mmc 0 0x3E00000 ${devicetree_image} && " \
"fatload mmc 0 0x2000000 ${ramdisk_image} && " \ "fatload mmc 0 0x2000000 ${ramdisk_image} && " \
"bootm 0x3A00000 0x2000000 0x3400000\0" \ "bootm 0x3F00000 0x2000000 0x3E00000\0" \
"nandboot=echo Copying Linux from NAND flash to RAM... && " \ "nandboot=echo Copying Linux from NAND flash to RAM... && " \
"nand read 0x3000000 0x100000 ${kernel_size} && " \ "nand read 0x3000000 0x100000 ${kernel_size} && " \
"nand read 0x2A00000 0x600000 ${devicetree_size} && " \ "nand read 0x2A00000 0x600000 ${devicetree_size} && " \
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment