Continue with clocks

ezynq_mio.py

@@ -166,6 +166,15 @@ MIO_TEMPLATES = {
       ((10, 14, 18, 22, 26, 30, 34, 38, 42, 46, 50), (9, 13, 17, 21, 25, 29, 33, 37, 41, 45, 49, 53))},
      {'NAME':'TX', 'TRISTATE':False, 'FAST':False, 'PULLUP':False, 'L0':0, 'L1':0, 'L2':0, 'L3':1, 'PINS':
       ((11, 15, 19, 23, 27, 31, 35, 39, 43, 47, 51), (8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48, 52))}),
+
+  
+  'CAN_ECLK':( # Docs say that any MIO pin can be used, but 7,8 are out only, so probably they can not be assigned
+     {'NAME':'ECLK', 'TRISTATE':True,  'FAST':False, 'PULLUP':True,   'L0':0, 'L1':0, 'L2':0, 'L3':0, 'PINS':(
+       (0,1,2,3,4,5,6,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,
+        31,32,33,34,35,36,37.38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53),
+       (0,1,2,3,4,5,6,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,
+        31,32,33,34,35,36,37.38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53))},),    
+                 
   'UART':(
      {'NAME':'RX', 'TRISTATE':True,  'FAST':False, 'PULLUP':False, 'L0':0, 'L1':0, 'L2':0, 'L3':7, 'PINS':
       ((10, 14, 18, 22, 26, 30, 34, 38, 42, 46, 50), (9, 13, 17, 21, 25, 29, 33, 37, 41, 45, 49, 53))},
@@ -211,7 +220,7 @@ MIO_TEMPLATES = {
 MIO_INTERFACES=[
     {'CONFIG_NAME':'CONFIG_EZYNQ_QUADSPI_0',     'IFACE':'QUADSPI',      'CHANNEL':0},
     {'CONFIG_NAME':'CONFIG_EZYNQ_QUADSPI_1',     'IFACE':'QUADSPI_FBCLK','CHANNEL':1},
-    {'CONFIG_NAME':'CONFIG_EZYNQ_QUADSPI_FBCLK', 'IFACE':'ETH',          'CHANNEL':0},
+    {'CONFIG_NAME':'CONFIG_EZYNQ_QUADSPI_FBCLK', 'IFACE':'QUADSPI_FBCLK','CHANNEL':0},
     {'CONFIG_NAME':'CONFIG_EZYNQ_MIO_ETH_0',     'IFACE':'ETH',          'CHANNEL':0},                
     {'CONFIG_NAME':'CONFIG_EZYNQ_MIO_ETH_1',     'IFACE':'ETH',          'CHANNEL':1},                
     {'CONFIG_NAME':'CONFIG_EZYNQ_MIO_ETH_MDIO',  'IFACE':'MDIO',         'CHANNEL':0},
@@ -728,6 +737,14 @@ class EzynqMIO:
                 print i, mio_pin
             print mio_dflts
               
+    def get_used_interfaces(self):
+#        return self.mio_interfaces # all data
+#        for iface in self.mio_interfaces:
+#            print iface
+#        return {iface['NAME']:iface['CHANNEL'] for iface in self.mio_interfaces}
+        return [{'NAME':iface['NAME'],'CHANNEL':iface['CHANNEL'],'PIN':iface['IFACE'].items()[0][1]['PIN']} for iface in self.mio_interfaces]
+
+
 ###### not used as they are prohibited by RBL
 # def output_gpio_out(registers,f,MIO_HTML_MASK):
 #     if f:

ezynqcfg.py

@@ -292,8 +292,10 @@ ddr=ezynq_ddr.EzynqDDR([],permit_undefined_bits, force, warn_notfit) #regs_maske
 ddr.parse_parameters(raw_configs)
 ddr_type=ddr.get_ddr_type()
 
+used_mio_interfaces=mio_regs.get_used_interfaces()
+
 #clk=ezynq_clk.EzynqClk(regs_masked,ddr_type,permit_undefined_bits=False,force=False,warn=False)
-clk=ezynq_clk.EzynqClk([],ddr_type,permit_undefined_bits,force,warn_notfit) # will it verify memory type is set?
+clk=ezynq_clk.EzynqClk([],ddr_type,used_mio_interfaces,permit_undefined_bits,force,warn_notfit) # will it verify memory type is set?
 clk.parse_parameters(raw_configs)
 
 clk.calculate_dependent_pars() # will calculate DDR clock, needed for ddr.calculate_dependent_pars()

test.mk

@@ -240,11 +240,20 @@ CONFIG_EZYNQ_DDR_CLOCK_1_PROPOGATION_DELAY = 160
 CONFIG_EZYNQ_DDR_CLOCK_2_PROPOGATION_DELAY = 160
 CONFIG_EZYNQ_DDR_CLOCK_3_PROPOGATION_DELAY = 160
 
+
 ############# Main clock settings #############
 CONFIG_EZYNQ_CLK_PS_MHZ =   33.333333 # PS_CLK System clock input frequency (MHz)   
 CONFIG_EZYNQ_CLK_DDR_MHZ = 533.333333 # DDR clock frequency - DDR_3X (MHz)
-CONFIG_EZYNQ_CLK_ARM_MHZ = 640#667        # ARM CPU clock frequency cpu_6x4x (MHz)
+CONFIG_EZYNQ_CLK_ARM_MHZ = 667        # ARM CPU clock frequency cpu_6x4x (MHz)
 CONFIG_EZYNQ_CLK_CPU_MODE = 6_2_1     # CPU clocks set 6:2:1 (6:3:2:1) or 4:2:1 (4:2:2:1)
+CONFIG_EZYNQ_CLK_FPGA0 =        50.0 # FPGA 0 clock frequency (MHz)
+CONFIG_EZYNQ_CLK_FPGA1 =        50.0 # FPGA 1 clock frequency (MHz)
+CONFIG_EZYNQ_CLK_FPGA2 =        50.0 # FPGA 2 clock frequency (MHz)
+CONFIG_EZYNQ_CLK_FPGA3 =        50.0 # FPGA 3 clock frequency (MHz)
+CONFIG_EZYNQ_CLK_FPGA0_SRC =      IO # FPGA 0 clock source
+CONFIG_EZYNQ_CLK_FPGA1_SRC =      IO # FPGA 1 clock source
+CONFIG_EZYNQ_CLK_FPGA2_SRC =      IO # FPGA 2 clock source
+CONFIG_EZYNQ_CLK_FPGA3_SRC =      IO # FPGA 3 clock source
 
 ############# Normally do not need to be modified #############
 CONFIG_EZYNQ_CLK_DDR_DCI_MHZ = 10.0   # DDR DCI clock frequency (MHz). Normally 10 Mhz'},
@@ -252,27 +261,32 @@ CONFIG_EZYNQ_CLK_DDR2X_MHZ = 355.556 # DDR2X clock frequency (MHz). Does not nee
 CONFIG_EZYNQ_CLK_DDR_DCI_MHZ=   10.0 # DDR DCI clock frequency (MHz). Normally 10Mhz
 CONFIG_EZYNQ_CLK_SMC_MHZ =     100.0 # Static memory controller clock frequency (MHz). Normally 100 Mhz
 CONFIG_EZYNQ_CLK_QSPI_MHZ =    200.0 # Quad SPI memory controller clock frequency (MHz). Normally 200 Mhz
-CONFIG_EZYNQ_CLK_GIGE_MHZ =    125.0 # GigE Ethernet controller reference clock frequency (MHz). Normally 125 Mhz
+CONFIG_EZYNQ_CLK_GIGE0_MHZ =   125.0 # GigE 0 Ethernet controller reference clock frequency (MHz). Normally 125 Mhz
+CONFIG_EZYNQ_CLK_GIGE1_MHZ =   125.0 # GigE 1 Ethernet controller reference clock frequency (MHz). Normally 125 Mhz
 CONFIG_EZYNQ_CLK_SDIO_MHZ =    100.0 # SDIO controller reference clock frequency (MHz). Normally 100 Mhz
 CONFIG_EZYNQ_CLK_UART_MHZ =     25.0 # UART controller reference clock frequency (MHz). Normally 25 Mhz
 CONFIG_EZYNQ_CLK_SPI_MHZ =     200.0 # SPI controller reference clock frequency (MHz). Normally 200 Mhz
 CONFIG_EZYNQ_CLK_CAN_MHZ =     100.0 # CAN controller reference clock frequency (MHz). Normally 100 Mhz
 CONFIG_EZYNQ_CLK_PCAP_MHZ =    200.0 # PCAP clock frequency (MHz). Normally 200 Mhz
 CONFIG_EZYNQ_CLK_TRACE_MHZ =   100.0 # Trace Port clock frequency (MHz). Normally 100 Mhz
-CONFIG_EZYNQ_CLK_PLL_FCLK_MHZ = 50.0 # PLL DCLK clock frequency (MHz). Normally 50 Mhz
-CONFIG_EZYNQ_CLK_ARM_SRC =       ARM # ARM CPU clock source (normally ARM PLL)'},
-CONFIG_EZYNQ_CLK_DDR_SRC =       DDR # DDR (DDR2x, DDR3x) clock source (normally DDR PLL)'},
-CONFIG_EZYNQ_CLK_DCI_SRC =       DDR # DDR DCI clock source (normally DDR PLL)'},
-CONFIG_EZYNQ_CLK_SMC_SRC =        IO # Static memory controller clock source (normally IO PLL)'},
-CONFIG_EZYNQ_CLK_QSPI_SRC =       IO # Quad SPI memory controller clock source (normally IO PLL)'},
-CONFIG_EZYNQ_CLK_GIGE_SRC =       IO # GigE Ethernet controller clock source (normally IO PLL)'},
-CONFIG_EZYNQ_CLK_SDIO_SRC =       IO # SDIO controller clock source (normally IO PLL)'},
-CONFIG_EZYNQ_CLK_UART_SRC =       IO # UART controller clock source (normally IO PLL)'},
-CONFIG_EZYNQ_CLK_SPI_SRC =        IO # SPI controller clock source (normally IO PLL)'},
-CONFIG_EZYNQ_CLK_CAN_SRC =        IO # CAN controller clock source (normally IO PLL)'},
-CONFIG_EZYNQ_CLK_PCAP_SRC =       IO # PCAP controller clock source (normally IO PLL)'},
-CONFIG_EZYNQ_CLK_TRACE_SRC =      IO # Trace Port clock source (normally IO PLL)'},
-CONFIG_EZYNQ_CLK_PLL_FCLK_SRC =   IO # PLL FCLK clock source (normally IO PLL)'},
+CONFIG_EZYNQ_CLK_ARM_SRC =       ARM # ARM CPU clock source (normally ARM PLL)
+CONFIG_EZYNQ_CLK_DDR_SRC =       DDR # DDR (DDR2x, DDR3x) clock source (normally DDR PLL)
+CONFIG_EZYNQ_CLK_DCI_SRC =       DDR # DDR DCI clock source (normally DDR PLL)
+CONFIG_EZYNQ_CLK_SMC_SRC =        IO # Static memory controller clock source (normally IO PLL)
+CONFIG_EZYNQ_CLK_QSPI_SRC =       IO # Quad SPI memory controller clock source (normally IO PLL)
+CONFIG_EZYNQ_CLK_GIGE0_SRC =      IO # GigE 0 Ethernet controller clock source (normally IO PLL, can be EMIO)
+CONFIG_EZYNQ_CLK_GIGE1_SRC =      IO # GigE 1 Ethernet controller clock source (normally IO PLL, can be EMIO)
+CONFIG_EZYNQ_CLK_SDIO_SRC =       IO # SDIO controller clock source (normally IO PLL)
+CONFIG_EZYNQ_CLK_UART_SRC =       IO # UART controller clock source (normally IO PLL)
+CONFIG_EZYNQ_CLK_SPI_SRC =        IO # SPI controller clock source (normally IO PLL)
+CONFIG_EZYNQ_CLK_CAN_SRC =        IO # CAN controller clock source (normally IO PLL)
+CONFIG_EZYNQ_CLK_PCAP_SRC =       IO # PCAP controller clock source (normally IO PLL)
+CONFIG_EZYNQ_CLK_TRACE_SRC =      IO # Trace Port clock source (normally IO PLL)
+
+
+
+
+
 
 CONFIG_EZYNQ_DDR_DS_MEMORY_TYPE =  DDR3  # DDR memory type: DDR3 (1.5V), DDR3L (1.35V), DDR2 (1.8V), LPDDR2 (1.2V)
 ##### performance data, final values (overwrite calculated) #####