Commit 26ea7fc2 authored by Andrey Filippov's avatar Andrey Filippov

changed default 'ahead', modified delay for P_TRIG

parent 3c92f9d9
...@@ -124,7 +124,7 @@ ...@@ -124,7 +124,7 @@
$sensor_port=0; /// TODO: NC393 - add sensor port control, initially will use $sensor_port=0 for all php functions that require it $sensor_port=0; /// TODO: NC393 - add sensor port control, initially will use $sensor_port=0 for all php functions that require it
$autocampars='/www/pages/autocampars.php'; $autocampars='/www/pages/autocampars.php';
$descriptions=getParDescriptions($autocampars); $descriptions=getParDescriptions($autocampars);
$default_ahead=5; // 3; $default_ahead= 3;
$maxahead=6; /// maximal ahead of the current frame that tasks can currently be set to driver; //NC393 - is it the same? $maxahead=6; /// maximal ahead of the current frame that tasks can currently be set to driver; //NC393 - is it the same?
$minahead=4; /// skip to frame $minahead from the soonest next task before programming $minahead=4; /// skip to frame $minahead from the soonest next task before programming
$brief=true; $brief=true;
...@@ -408,24 +408,26 @@ $url_hdr_exp= "embed=0.1&title=HDR+exposure+controls" ...@@ -408,24 +408,26 @@ $url_hdr_exp= "embed=0.1&title=HDR+exposure+controls"
."&THIS_FRAME=@" /// Current frame ."&THIS_FRAME=@" /// Current frame
; ;
$url_ext_trigger="embed=0.1&title=External+trigger+controls" $url_ext_trigger="embed=0.1&title=External+trigger+controls"
."&TRIG=4" /// External trigger mode ."&TRIG=4*5" /// External trigger mode (should be set after dealys are set?)
/// bit 0 - "old" external mode (0- internal, 1 - external ) /// bit 0 - "old" external mode (0- internal, 1 - external )
/// bit 1 - enable(1) or disable(0) external trigger to stop clip /// bit 1 - enable(1) or disable(0) external trigger to stop clip
/// bit 2 - async (snapshot, ext trigger) mode, 0 - continuous NOTE: Only this bit is used now ! /// bit 2 - async (snapshot, ext trigger) mode, 0 - continuous NOTE: Only this bit is used now !
/// bit 3 - no overlap, single frames: program - acquire/compress same frame /// bit 3 - no overlap, single frames: program - acquire/compress same frame
."&TRIG_PERIOD=19200000"/// 0.2 sec @96MHz output sync period (32 bits, in pixel clocks) ."&TRIG_PERIOD=20000000"/// 0.2 sec @96MHz output sync period (32 bits, in pixel clocks)
/// >=256 repetitive with specified period. /// >=256 repetitive with specified period.
/// NOTE: Currently there is no verification that period is longer than sensor/compressor can handle /// NOTE: Currently there is no verification that period is longer than sensor/compressor can handle
."&TRIG_DELAY" /// trigger delay, 32 bits in pixel clocks (needed when multiple cameras are synchronized) ."&TRIG_DELAY" /// trigger delay, 32 bits in pixel clocks (needed when multiple cameras are synchronized)
."&EXTERN_TIMESTAMP=1" /// Use external timestamp if available ."&EXTERN_TIMESTAMP=1" /// Use external timestamp if available
."&TRIG_BITLENGTH=255" /// bit lengh minus 1 in pixel clocks (when sending timestamp over sync line) ."&TRIG_BITLENGTH=31" /// bit lengh minus 1 in pixel clocks (when sending timestamp over sync line)
."&XMIT_TIMESTAMP=1" /// transmit timestamp when sending sync ."&XMIT_TIMESTAMP=1" /// transmit timestamp when sending sync
."&THIS_FRAME=@" /// Current frame ."&THIS_FRAME=@" /// Current frame
///Next parameters are non-zero only for external connections and should match particular I/O boards/connectors ///Next parameters are non-zero only for external connections and should match particular I/O boards/connectors
."&TRIG_CONDITION=0" /// trigger condition, 0 - internal, else dibits ((use<<1) | level) for each GPIO[11:0] pin ."&TRIG_CONDITION=0" /// trigger condition, 0 - internal, else dibits ((use<<1) | level) for each GPIO[11:0] pin
."&TRIG_OUT=0" /// trigger output to GPIO, dibits ((use << 1) | level_when_active). Bit 24 - test mode, /// 0x0 - from FPGA, 0x80000 - ext, 0x8000 - int, 0x88000 - any, 0x95555 - add ext, 0x59999 - add int
."&TRIG_OUT=0x65555" /// trigger output to GPIO, dibits ((use << 1) | level_when_active). Bit 24 - test mode,
/// when GPIO[11:10] are controlled by other internal signals /// when GPIO[11:10] are controlled by other internal signals
/// 0x56555 - ext connector, 0x65555 - internal connector 0x66555 - both, 0x55555 - none
."&SENSOR_REGS30=@" /// Sensor register MODE1 (trigger bit) ."&SENSOR_REGS30=@" /// Sensor register MODE1 (trigger bit)
; ;
$url_cable_delay="embed=0.3&title=Cable+delay+/+Sensor+phase+adjustment" $url_cable_delay="embed=0.3&title=Cable+delay+/+Sensor+phase+adjustment"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment