Commit 0e02bb87 authored by Andrey Filippov's avatar Andrey Filippov

temporary: adding a separate init script for Eyesis 2 bottom cameras

parent 3896da9b
......@@ -15,7 +15,8 @@ INSTMODE = 0755
SCRIPT1=init_elphel393.py
SCRIPT2=init_elphel393
SCRIPT3=init_elphel393.sh
SCRIPT3=init_elphel393.sh # used for Eyesis 12-sensors
SCRIPT4=init_eyesis_bottom2.sh
all:
@echo "make all in src"
......@@ -34,6 +35,11 @@ install:
$(INSTALL) $(OWN) -m $(INSTMODE) $(SCRIPT3).tmp $(CONFDIR)/$(SCRIPT3)
rm $(SCRIPT3).tmp
sed -e 's/192.168.0.9/$(REMOTE_IP)/' $(SCRIPT4) > $(SCRIPT4).tmp
$(INSTALL) $(OWN) -d $(CONFDIR)
$(INSTALL) $(OWN) -m $(INSTMODE) $(SCRIPT4).tmp $(CONFDIR)/$(SCRIPT4)
rm $(SCRIPT4).tmp
#INITSTRING default is defined in local.conf, weak default - meta-core/init/init.bb
sed -e 's/init_elphel393.py/$(INITSTRING)/' $(SCRIPT2) > $(SCRIPT2).tmp
......
#/bin/sh
#Do it early (add DT configuration), it takes ~1 sec to drop voltage to < 1.0V
echo "0x101" > /sys/devices/soc0/elphel393-pwr@0/gpio_10389 # power on (it is actually already on)
echo "0x100" > /sys/devices/soc0/elphel393-pwr@0/gpio_10389 # power off
sleep 1
# select sensor type: 5 Mpx (set 5) or 14 Mpx (set 14)
# 14MPix does not work with framepars & parsedit!!!
SENSOR_TYPE=5
# imgsrv port number
IMGSRV_PORT=2323
# camogm port number
CAMOGM_PORT=3456
# camogm command pipe name
CAMOGM_PIPE=/var/volatile/camogm_cmd
# enable SATA, set this to 1 if camera is equipped with SSD drive
SATA_EN=1
#IP will be modified to the $(REMOTE_IP) by the Makefile during install. You may change it in your
ifconfig eth0 192.168.0.9
PYDIR=/usr/local/bin
VERILOG_DIR=/usr/local/verilog
#echo "exiting before power on"
#exit 0;
$PYDIR/test_mcntrl.py @${VERILOG_DIR}/hargs-eyesis
#$PYDIR/test_mcntrl.py @${VERILOG_DIR}/hargs
echo imgsrv -p 2323
imgsrv -p 2323
#restart PHP - it can get errors while opening/mmaping at startup, then some functions fail
killall lighttpd; /usr/sbin/lighttpd -f /etc/lighttpd.conf
/www/pages/exif.php init=/etc/Exif_template.xml
#echo "TURN 10359 power in the next 10 seconds"
#sleep 10
#exit 0
##cat /usr/local/verilog/x359.bit > /dev/sfpgaconfjtag0
##cat /usr/local/verilog/x359.bit > /dev/sfpgaconfjtag1
##cat /usr/local/verilog/x359.bit > /dev/sfpgaconfjtag2
##cat /usr/local/verilog/x359.bit > /dev/sfpgaconfjtag3
#exit 0
#wget -O /dev/null "localhost/framepars.php?sensor_port=3&cmd=min_init"
#wget -O /dev/null "localhost/framepars.php?sensor_port=2&cmd=min_init"
#Using same min_init as for multiplexed Eyesis, phase will likely be wrong (correct separately)
wget -O - "localhost/framepars.php?sensor_port=3&cmd=min_init"
wget -O - "localhost/framepars.php?sensor_port=2&cmd=min_init"
sleep 2
cat /proc/interrupts
#sleep 1
#cat /proc/interrupts
autoexposure -p 2 -c 0 -b 0 -d 1 &
autoexposure -p 3 -c 0 -b 0 -d 1 &
#autoexposure -p 1 -c 0 -b 0 -d 1 &
#autoexposure -p 0 -c 0 -b 0 -d 1 &
wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=2&COMPRESSOR_RUN=2&DAEMON_EN=1*12&AUTOEXP_ON=1&AEXP_FRACPIX=0xff80&AEXP_LEVEL=0xf800&AE_PERIOD=4&AE_THRESH=500&HIST_DIM_01=0x0a000a00&HIST_DIM_23=0x0a000a00&EXP_AHEAD=3"
wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=3&COMPRESSOR_RUN=2&DAEMON_EN=1*12&AUTOEXP_ON=1&AEXP_FRACPIX=0xff80&AEXP_LEVEL=0xf800&AE_PERIOD=4&AE_THRESH=500&HIST_DIM_01=0x0a000a00&HIST_DIM_23=0x0a000a00&EXP_AHEAD=3"
#wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=1&COMPRESSOR_RUN=2&DAEMON_EN=1*12&AUTOEXP_ON=1&AEXP_FRACPIX=0xff80&AEXP_LEVEL=0xf800&AE_PERIOD=4&AE_THRESH=500&HIST_DIM_01=0x0a000a00&HIST_DIM_23=0x0a000a00&EXP_AHEAD=3"
#wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=0&COMPRESSOR_RUN=2&DAEMON_EN=1*12&AUTOEXP_ON=1&AEXP_FRACPIX=0xff80&AEXP_LEVEL=0xf800&AE_PERIOD=4&AE_THRESH=500&HIST_DIM_01=0x0a000a00&HIST_DIM_23=0x0a000a00&EXP_AHEAD=3"
wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=2&COMPRESSOR_RUN=2&DAEMON_EN=1&WB_EN=0x1&WB_MASK=0xd&WB_PERIOD=16&WB_WHITELEV=0xfae1&WB_WHITEFRAC=0x028f&WB_SCALE_R=0x10000&WB_SCALE_GB=0x10000&WB_SCALE_B=0x10000&WB_THRESH=500&GAIN_MIN=0x18000&GAIN_MAX=0xfc000&ANA_GAIN_ENABLE=1&GAINR=0x10000&GAING=0x10000&GAINGB=0x10000&GAINB=0x10000"
wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=3&COMPRESSOR_RUN=2&DAEMON_EN=1&WB_EN=0x1&WB_MASK=0xd&WB_PERIOD=16&WB_WHITELEV=0xfae1&WB_WHITEFRAC=0x028f&WB_SCALE_R=0x10000&WB_SCALE_GB=0x10000&WB_SCALE_B=0x10000&WB_THRESH=500&GAIN_MIN=0x18000&GAIN_MAX=0xfc000&ANA_GAIN_ENABLE=1&GAINR=0x10000&GAING=0x10000&GAINGB=0x10000&GAINB=0x10000"
#wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=1&COMPRESSOR_RUN=2&DAEMON_EN=1&WB_EN=0x1&WB_MASK=0xd&WB_PERIOD=16&WB_WHITELEV=0xfae1&WB_WHITEFRAC=0x028f&WB_SCALE_R=0x10000&WB_SCALE_GB=0x10000&WB_SCALE_B=0x10000&WB_THRESH=500&GAIN_MIN=0x18000&GAIN_MAX=0xfc000&ANA_GAIN_ENABLE=1&GAINR=0x10000&GAING=0x10000&GAINGB=0x10000&GAINB=0x10000"
#wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=0&COMPRESSOR_RUN=2&DAEMON_EN=1&WB_EN=0x1&WB_MASK=0xd&WB_PERIOD=16&WB_WHITELEV=0xfae1&WB_WHITEFRAC=0x028f&WB_SCALE_R=0x10000&WB_SCALE_GB=0x10000&WB_SCALE_B=0x10000&WB_THRESH=500&GAIN_MIN=0x18000&GAIN_MAX=0xfc000&ANA_GAIN_ENABLE=1&GAINR=0x10000&GAING=0x10000&GAINGB=0x10000&GAINB=0x10000"
if [ $SATA_EN -eq 1 ]; then
$PYDIR/x393sata.py
modprobe ahci_elphel &
sleep 2
echo 1 > /sys/devices/soc0/amba@0/80000000.elphel-ahci/load_module
fi
echo "starting temperature monitor with fan control disabled"
tempmon.py --control_fan off &
echo "/etc/init_elphel393.sh done"
exit 0
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment